logo
                    pres
Michel Perez home page
[Short Curriculum]
MATEIS
Photo-MP
Universite de Lyon - INSA de Lyon
MATEIS - UMR CNRS 5510
25 avenue Capelle
F 69621 Villeurbanne Cedex


Tel. +33 4 72 43 80 63

Fax. +33 4 72 43 85 39


cnrs
Precipitation     Molecular Dynamics       Phase Transformations
Kinetic Monte-Carlo       Static/Dynamic Ageing      Grain Growth
Low alloy steels     FeC EAM potential     Block Copolymers PreciSo


Teaching - Enseignement
Research - Recherche
Job offer
Waves - Ondes:
Ondes
  Lecture notes (download)

 
Physics - Physique:

Issac
Lecture notes on point mechanics CollegePhysics
(download)

Lecture Slides (LANIP) (download)

(lecture schedule)

College Physics (download)                    
Material science - Science des matériaux:
Materiaux.png
Tutorials (download)


Units and uncertainty - Unites et  incertitudes:
Galile Lecture notes (download)
Other documents - Documents divers
Simulations Thermodynamics movies

Habilitation a Diriger des Recherches:

4emeCouverture"Approche multi-echelle de la precipitation"
(download)



PhD - Theses

Daniel Acevedo-Reyes (download)
Claire Leguen
(download)
Ali Makke (download)
Roberto Veiga
(download)
Jean-Baptiste Baudouin (download)
Mohamad Razzak (download)
Loic Courtois (download)
Xavier Boulnat (download)
Didier Bardel (download)
Ben Lawrence (download)

Jerome Blaizot (download)
Alexandre Balan (download)
Osamu Waseda (download)
Morgane Mahaud (download)
William Goncalvez (download)
Mélanie Ollat (download)
Gwenaëlle Meyruey
Alexis Graux
Zhai Zengzengqiang
Post-Docs

Carole Dessolin
Deyana Tchitchekova
Julien Boisse
Jonathan Amodeo

The GraCoS project

Presentation
People: Chad Sinclair, Arnaud Weck, Xavier Sauvage

(Post-doc position offer):

(PhD position offer):


List of Publications

Microstructural study of the NbC to G-phase transformation in HP-Nb alloys, N Vaché, P Steyer, C Duret-Thual, M Perez, T Douillard, E Rauch, ..., Materialia, 100593 (2020)

Disentangling and Lamellar Thickening of Linear Polymers during Crystallization: Simulation of Bimodal and Unimodal Molecular Weight Distribution Systems, Z Zhai, C Fusco, J Morthomas, M Perez, O Lame, ACS nano 13 (10), 11310-11319 (2019)

A novel method to predict the thermal conductivity of nanoporous materials from atomistic simulations, J Morthomas, W Gonçalves, M Perez, G Foray, CL Martin, P Chantrenne, Journal of Non-Crystalline Solids 516, 89-98 (2019)

Diffusion model for austenite formation kinetics during inter-critical annealing of dual-phase steels, P Chantrenne, M Perez, M Ollat, V Massardier, D Fabrègue, P Rocabois, Modelling and Simulation in Materials Science and Engineering 27 (6), 065007 (2019)

Crystallization and Molecular Topology of Linear Semicrystalline Polymers: Simulation of Uni-and Bimodal Molecular Weight Distribution Systems, Z Zhai, J Morthomas, C Fusco, M Perez, O Lame, Macromolecules 52 (11), 4196-4208 (2019)

Three-dimensional structure and formation mechanisms of Y2O3 hollow-precipitates in a Cu-based metallic glass, O Baulin, T Douillard, D Fabrègue, M Perez, JM Pelletier, M Bugnet, Materials & Design 168, 107660 (2019)

Precipitation and grain growth modelling in Ti-Nb microalloyed steels, A Graux, S Cazottes, D De Castro, D San Martín, C Capdevila, ..., Materialia 5, 100233 (2019)

Phase Field Modelling of Abnormal Grain Growth, Y Liu, M Militzer, M Perez, Materials 12 (24), 4048 (2019)

Modeling Tools: From the Atom to the Macroscopic Scale, C Becquart, C Domain, M Fivel, M Perez, L Thuinet, Mechanics-Microstructure-Corrosion Coupling, 145-168 (2019)

Ordering of carbon in highly supersaturated α-Fe, O Waseda, J Morthomas, F Ribeiro, P Chantrenne, CW Sinclair, M Perez, Modelling and Simulation in Materials Science and Engineering 27 (1), 015005 (2018)

Recent advances in the metallurgy of aluminum alloys. Part II: Age hardening, C Sigli, F De Geuser, A Deschamps, J Lépinoux, M Perez Comptes Rendus Physique 19 (8), 688-709 (2018)

Influence of solidification induced composition gradients on carbide precipitation in FeNiCr heat resistant steels, M Roussel, X Sauvage, M Perez, D Magné, A Hauet, A Steckmeyer, ..., Materialia 4, 331-339 (2018)

Nanocompression of secondary particles of silica aerogel, W Gonçalves, J Amodeo, J Morthomas, P Chantrenne, M Perez, G Foray, ... Scripta Materialia 157, 157-161 (2018)

Anti-aging treatment of nuclear power plant steel, Y Zhao, B He, S Saillet, C Domain, P Le Delliou, M Perez, R Qin, Materials Science and Engineering: A 735, 73-80 (2018)

A novel approach to investigate delta phase precipitation in cold-rolled 718 alloys, ZK Low, T Chaise, D Bardel, S Cazottes, P Chaudet, M Perez, D Nelias, Acta Materialia 156, 31-42 (2018)

Polymer Chain Generation for Coarse-Grained Models Using Radical-Like Polymerization, M Morgane, Z Zhai, M Perez, O Lame, C Fusco, L Chazeau, A Makke, ... (2018)

Over-ageing of an Al-Mg-Si alloy with silicon excess, G Meyruey, V Massardier, W Lefebvre, M Perez, Materials Science and Engineering: A 730, 92-105 (2018)

Mixed-mode model for ferrite-to-austenite phase transformation in dual-phase steel, M Ollat, M Militzer, V Massardier, D Fabregue, E Buscarlet, F Keovilay, ..., Computational Materials Science 149, 282-290 (2018)

Microscopic origin of plastic deformation in semicrystalline polymers, S Jabbari-Farouji, J Rottler, O Lame, M Perez, JL Barrat, Bulletin of the American Physical Society (2018)

Elasticity and strength of silica aerogels: A molecular dynamics study on large volumes, W Gonçalves, J Morthomas, P Chantrenne, M Perez, G Foray, CL Martin
Acta Materialia 145, 165-174 (2018)

Characterization and Modelling of the Precipitation Sequence of an Al-Mg-Si Alloy with Silicon Excess for the Prediction of the Mechanical Properties during Ageing, V Massardier, G Meyruey, M Perez, Materials Science Forum 941, 1161-1166 (2018)

Crystallization of finite-extensible nonlinear elastic Lennard-Jones coarse-grained polymers, J Morthomas, C Fusco, Z Zhai, O Lame, M Perez, Physical Review E 96 (5), 052502 (2017)

Modeling of the recrystallization and austenite formation overlapping in cold-rolled dual-phase steels during intercritical treatments, M Ollat, V Massardier, D Fabregue, E Buscarlet, F Keovilay, M Perez, Metallurgical and Materials Transactions A 48 (10), 4486-4499 (2017)

Stability of nanocrystalline Ni-based alloys: coupling Monte Carlo and molecular dynamics simulations, O Waseda, H Goldenstein, GFBL e Silva, A Neiva, P Chantrenne,
Modelling and Simulation in Materials Science and Engineering 25 (7), 075005 (2017)

Precipitation Kinetics in a Nb-stabilized Ferritic Stainless Steel M Labonne, A Graux, S Cazottes, F Danoix, F Cuvilly, F Chassagne, M Perez, V Massardier, Metall. Mater. Trans. A 48 (8), 3655-3664 (2017)

Role of the intercrystalline tie chains network in the mechanical response of semicrystalline polymers, S Jabbari-Farouji, O Lame, M Perez, J Rottler, JL Barrat, Phys. Rev. Lett. 118 (21), 217802 (2017)

Formation of carbon Cottrell atmospheres and their effect on the stress field around an edge dislocation, O. Waseda, R. G. A. Veiga, J. Morthomas, P. Chantrenne, C.S. Becquart, F. Ribeiro, A. Jelea, H. Goldenstein, M. Perez, Scripta Mater. 129:16-19 (2017)

Residual stresses induced by electron beam welding in a 6061 aluminium alloy,  D Bardel, D Nelias, V Robin, T Pirling, X Boulnat, M Perez, J. Mater. Process. Tech. 235:1-12 (2016)

Integrated modelling of a 6061-T6 weld joint: From microstructure to mechanical properties,  D Bardel, M Fontaine, T Chaise, M Perez, D Nelias, F Bourlier, J Garnier, Acta Mater. 117:81-90 (2016)

Molecular dynamics simulations of amorphous silica surface properties with truncated Coulomb interactions, W Gonçalves, J Morthomas, P Chantrenne, M Perez, G Foray, CL Martin, J. Non-Cryst. Sol. 447:1-8 (2016)

Ageing of 100Cr6 steel: synchrotron X-ray diffraction and dimensional analysis investigation,  V Lejay, C Sidoroff, C Le Bourlot, M Perez, P Dierickx, Mater. Sc.Tech. 32:1106-1110 (2016)

Constitutive model for nickel alloy 690 (Inconel 690) at various strain rates and temperatures,  J Blaizot, T Chaise, D Nélias, M Perez, S Cazottes, P Chaudet, Int. J. Plast. 80: 139-153 (2016)

Characterization and modeling of oxides precipitation in ferritic steels during fast non-isothermal consolidation,  X. Boulnat, M. Perez, D. Fabregue, S. Cazottes, Y. de Carlan, Acta Mater. 107:390-403 (2016)

Tailoring the mechanical properties of steel sheets using FeC films and diffusion annealing, E. Cantergiani, A. Fillon, B. Lawrence, X. Sauvage, M. Perez, C. P. Scott and A. Weck, Materials Science & Engineering A, 657:291-298 (2016)

Monte Carlo and molecular dynamics simulations of screw dislocation locking by Cottrell atmospheres in low carbon Fe–C alloys. R. G. A. Veiga, H. Goldenstein, M. Perez, C. S. Becquart, Scripta Mater. 108:19-22 (2016)

Molecular dynamics investigation of the interaction of an edge dislocation with Frank loops in Fe–Ni 10–Cr 20 alloy,  J. B. Baudouin, A. Nomoto, M. Perez, G. Monnet, C. Domain, J. Nucl. Mater. 465:301-310 (2015)

Tailoring the microstructure and the mechanical properties of ultrafine grained high strength ferritic steels by powder metallurgy,  B. Mouawad, X. Boulnat, D. Fabrègue, M. Perez, Y. de Carlan, J. Nucl. Mater. 465:54-62 (2015)

Influence of oxide volume fraction on abnormal growth of nanostructured ferritic steels during non-isothermal treatments: An in situ study, X Boulnat, N Sallez, M Dadé, A Borbély, JL Béchade, Y De Carlan, J. Malaplate, Y. Bréchet, F. de Geuser, A. Deschamps, P. Donnadieu, D. Fabrègue, M. Perez, Acta Mater. 97, 124-130 (2015)

Correlation of structure and mechanical response in solid-like polymers,  S Jabbari-Farouji, J Rottler, O Lame, A Makke, M Perez, JL Barrat, Journal of Physics: Condensed Matter 27 (19):194131 (2015)

In situ characterization of microstructural instabilities: recovery, recrystallization and abnormal growth in nanoreinforced steel powder.  Sallez (N.), Boulnat (X.), Borbély (A.), Béchade (J. L.), Fabègue (D.), Perez (M.), de Carlan (Y.), Hennet (L.), Mocuta (C.), Thiaudère (D.), and Bréchet (Y.), Acta Mater, 87:377–389, (2015)

In situ investigation of MgO nanocube deformation at room temperature", Issa (I.), Amodeo (J.), Réthoré (J.), Joly-Pottuz (L.), Esnouf (C.), Morthomas (J.), Perez (M.), Chevalier (J.), and Masenelli-Varlot (K.), Acta Mater. 86:295-304 (2015)

Cyclic behaviour of a 6061 aluminium alloy: Coupling precipitation and elastoplastic modelling, Bardel (D.), Perez (M.), Nelias (D.), Dancette (S.), Chaudet (P.), and Massardier (V.). Acta Mater. 83:256–258 (2015)

On the direct nucleation and growth of ferrite and cementite without austenite,  Fillon (A.), Sauvage (X.), Lawrence (B.), Sinclair (C.), Perez (M.), Weck (A.), Cantergiani (E.), Epicier (T.), and Scott (C. P.), Scripta Mater. 95:35-38 (2015)

Plastic deformation mechanisms of semi-crystalline and amorphous polymers, Jabbari-Farouji (S.), Rottler (J.), Lame (O.), Makke (A.), Perez (M.), Barrat (J. L.).  ACS Macro Lett. 4:147-150 (2015)

Sintering of ferritic and austenitic nanopowders using Spark Plasma Sintering,  B. Mouawad, D. Fabregue, M Perez, M Blat, F Delabrouille, C Domain, C. Pokor, Metall. Res. Technol. 111:305-310 (2014)

Advantages and Shortcomings of Retained Austenite in Bearing Steels: a Review,  C. Sidoroff, M. Perez, P. Dierickx, D. Girodin, Bearing Steel Tech.: 10th vol., Adv. Steel Tech. Roll. Bearings (2014)

Carbon diffusion in supersaturated ferrite: a comparison of mean-field and atomistic predictions, Lawrence (B.), Sinclair (C. W.), Perez (M.), Model. Sim. Mater. Sc. Eng. 22:065003 (2014)

A novel method for calculating the energy barriers for carbon diffusion in ferrite under heterogeneous stress,  Tchitchekova (D. S.), Morthomas (J.), Ribeiro (F.), Ducher (R.), Perez (M.), J. Chem. Phys., vol. 141, 2014, 034118

Assessment of consolidation of oxide dispersion strengthened ferritic steels by spark plasma sintering: from laboratory scale to industrial products,  Boulnat (X.), Fabrègue (D.), Perez (M.), Urvoy (S.), Hamon (D.), de Carlan (Y.), Powder Metallurgy, vol. 57, 2014, p. 204-211

Microstructure evolution in nano-reinforced ferritic steel processed by mechanical alloying and spark plasma sintering",  Boulnat (X.), Perez (M.), Fabregue (D.), Douillard (T.), Mathon (M. H.), De Carlan (Y.), Met. Mat. Trans. A, vol. 45, 2014, p. 1485-1497

Comments on "Atomistic modeling of an Fe system with a small concentration of C",  Veiga (R. G. A.), Becquart (C. S.) et Perez (M.), Comput. Mater. Sc., vol. 82, 2014, p. 118-121

Coupled precipitation and yield strength modelling for non-isothermal treatments of a 6061 aluminium alloy,  Bardel (D.), Perez (M.), Nelias (D.), Deschamps (A.), Hutchinson (C. R.), Maisonnette (D.), Chaise (T.), Garnier (J.), Bourlier (F.), Acta Mater., vol. 62, 2014, p. 129-140

Nanoscale Buckling in Lamellar Block Copolymers: A Molecular Dynamics Simulation Approach,  Makke (A.), Lame (O.) Perez (M.) et Barrat (J. L.), Macromolecules, vol. 46, 2013, p. 7853-7864

High-Temperature Tensile Properties of Nano-Oxide Dispersion Strengthened Ferritic Steels Produced by Mechanical Alloying and Spark Plasma Sintering,  Boulnat (X.), Fabregue (D.), Perez (M.) Mathon (M. H.) et Decarlan (Y.), Metall. Mater. Trans. A, vol. 44A, 2013, p. 2461-2465

Influence of a magnetic field on the precipitation behaviour of nano-scale cobalt particles in a copper matrix,  Takeda (M.), Wada (N.), Hiroi (Z.), Kadono (J.), Perez (M.), Rivoirard (S.), Mater. Lett., vol. 98, 2013, p.201-204

Effect of the applied stress and the friction stress on the dislocation dissociation in face centered cubic metals,  Baudouin (J. B.), Monnet (G.), Perez (M.), Domain (C.) et Nomoto (A.), Materials Lett., vol. 97, 2013, p. 93-96

Atomistic modeling of carbon Cottrell atmospheres in bcc iron,  Veiga (R. G. A.), Perez (M.), Becquart (C. S.) et Domain (C.), J. Phys.: Cond. Matter., vol. 25, 2013, p. 025401


Modified embedded-atom method interatomic potential and interfacial thermal conductance of Si-Cu systems: A molecular dynamics study,  Cruz (C. A. ), Chantrenne (P.), Veiga (R. G. A.), Perez (M.) and Kleber (X.), J. Appl. Phys.,vol. 113, 2013, p. 023710

A Simple Model for Abnormal Grain Growth, Razzak (M. A.), Perez (M.), Sourmail (T.), Cazottes (S.) et Frottey (M.), ISIJ Intl., vol. 52, 2012; p. 2278-2282

Mechanical properties of monofilament entangled materials, Courtois (L.), Maire (E.), Perez (M.), Brechet (Y.), Rodney (D.) et Bouaziz (O.), Adv. Eng. Mat., vol. 14, 2012, p. 1128-1133

Influence of Tie and Loop Molecules on the Mechanical Properties of Lamellar Block Copolymers,  Makke (A.), Perez (M.), Lame (O.) et Barrat (J.-L.), Macromolecules, vol. 45 (20), 2012, p. 8445–8452


Numerical integration of the gibbs–thomson equation for multicomponent systems,  Du (Q.), Perez (M.), Poole (W. J.) et Wells (M.), Scripta Mater., vol. 66, 2012, p. 419-422

Nanoscale buckling deformation in layered copolymer materials,  Makke (A.), Perez (M.), Lame (O.) et Barrat (J.-L.), PNAS, vol. 109, 2012, p. 680–685

Rolling bearing applications: some trends in materials and heat treatments,  Tonicello (E.), Girodin (D.), Sidoroff (C.), Fazekas (A.) et Perez* (M.), Mater. Sc. Tech., vol. 28, 2012, p. 23–26

Ordering in highly supersaturated alpha-Fe-C,  C Sinclair, M Perez,  Sol. State Phenom. 172-174:996-1001 (2011)


Comparison of atomistic and elasticity approaches for carbon diffusion near line defects in alpha-iron, Veiga (R. G. A.), Perez (M.), Becquart (C. S.), Clouet (E.) et Domain (C.), Acta Mater., vol. 59, 2011, p. 5963–597

Low temperature precipitation kinetics of niobium nitride platelets in Fe, Deschamps (A.), Danoix (F.), Geuser (F. D.), Epicier (T.), Leitner (H.) et Perez (M.), Matter. Lett., vol. 65, no 2265- 2268, 2011

Microstructure modifications induced by a laser surface treatment in an aa7449 aluminium alloy, Fribourg (G.), Deschamps (A.), Brechet (Y.), Mylonas (G.), Labeas (G.), Heckenberger (U.) et Perez (M.), Mater. Sc. Eng. A, vol. 528, 2011, p. 2736–2747

Predictors of cavitation in glassy polymers under tensile strain: A coarse-grained molecular dynamics investigation, Makke (A.), Perez (M.), Rottler (J.), Lame (O.) et Barrat (J. L.), Macroml. Th. and Sim., vol. 20, 2011, p. 826–836

Mesoscopic modelling of precipitation: a tool for extracting physical parameters of phase transformations in metallic alloys, Deschamps (A.) et Perez* (M.), CRAS, vol. 11, 2010, p. 236–244

Effect of the stress field of an edge dislocation on carbon diffusion in α-iron: coupling molecular statics and atomistic kinetic Monte-Carlo,  Veiga (R. G. A.), Perez (M.), Becquart (C. S.), Domain (C.) et Garruchet (S.), Phys. Rev. B, vol. 82, 2010, p. 054103


Non-isothermal austenite grain growth kinetics in a microalloyed x-80 pipeline steel,  Banerjee (K.), Wang (X.), Perez (M.) et Militzer (M.), Met. Mat. Trans A, vol. August, 2010, p. 1–12


Molecular dynamics study of the ordering of carbon in highly supersaturated α-fe, Sinclair (C. W.), Perez (M.), Veiga (R. G. A.) et Weck (A.), Phys. Rev. B, vol. 81, 2010, p. 224204


Dynamique moléculaire appliquéeaux matériaux, Becquart (C.) and Perez (M.), Techniques de l'ingénieur, RE136, 2010, pp. 1-9

Global techniques for characterizing phase transformations: a tutorial review,  Perez (M.), Lame (O.) et Deschamps (A.), Adv. Eng. Mat., vol. 12, 2010, p. 433–446


Mechanical testing of glassy and rubbery polymers in numerical simulations: role of boundary conditions in tensile stress experiments, Makke (A.), Perez (M.), Lame (O.) et Barrat (J.-L.), J. Chem. Phys., vol. 131, 2009, p. 01490


Microstructure evolution of martensitic 100Cr6 bearing steel during tempering, Perez (M.), Sidoroff (C.), Vincent (A.) et Esnouf (C.), Acta. Mater., vol. 57, 2009, p. 3170–3181

Thermoelectric power applied to metallurgy: principle and recent applications, Perez (M.), Massardier (V.) et Kleber (X.), Intl. J. Mater. Research, vol. 100, 2009, p. 1461–1465

Dislocation interaction with C in α-Fe: a comparison between atomic simulations and elasticity theory, Clouet (E.), Garruchet (S.), Nguyen (H.), Perez (M.) et Becquart (C. S.), Acta Mater., vol. 56, 2008, p. 3450–3460


Polymer chain generation for coarse grained models using radical-like polymerization, Perez (M.), Lame (O.), Leonforte (F.) et Barrat (J. L.), J. Chem. Phys., vol. 128, 2008, p. 234904

Implementation of the classical nucleation theory for precipitation, Perez (M.), Dumont (M.) et Acevedo-Reyes (D.), Acta Mater., vol. 56, 2008, p. 2119–2132

Characterisation of precipitates size distribution: validation of low voltage SEM, Acevedo-Reyes (D.), Perez (M.), Epicier (T.), Bogner (A.), Epicier (T.) et Verdu (C.),  J. of Microscpy, vol. 232, 2008, p. 112–122

Modeling the snoek peak by coupling molecular dynamics and kinetic Monte-Carlo methods, Garruchet (S.) et Perez (M.), Comp. Mat. Sc., vol. 43, 2008, p. 286–292

Crystallographic structure of vanadium carbide precipitates in a model Fe-C-V steel, Epicier (T.), Acevedo (D.) et Perez (M.), Phil. Mag., vol. 88, 2008, p. 31–45

Precipitation of niobium carbonitrides in ferrite: chemical composition measurements and thermodynamical modelling,  Perez (M.), Courtois (E.), Acevedo (D.), Epicier (T.) et Maugis (P.), Phil. Mag. Lett., vol. 87, 2007, p. 645–656

Atomistic modeling of Fe system with small C concentration, Becquart (C. S.), Raulot (J. M.), Benecteux (G.), Domain (C.), Perez (M.), Garruchet (S.) et Nguyen (H.), Comp. Mat. Sc., vol. 40, 2007, p. 119–129

Vanadium Carbide Dissolution During Austenitisation of A Model Microalloyed FeCV Steel, D Acevedo Reyes, M Perez, S Pecoraro, A Vincent, T Epicier, P Dierickx, Mater. Sc. Forum 500-501:695-702 (2005)

Low temperature solubility of copper in iron: expertimental study using ThermoElectric Power, Small AngleX-ray Scattering and Tomographic Atom Probe, Perez (M.), Perrard (F.), Massardier (V.), Kleber (X.), Deschamps (A.), Monestrol (H. D.), Pareige (P.) et Covarel (G.), Phil. Mag., vol. 85, no 20, 2005, p. 2197–2210

Gibbs-Thomson effect in phase transformations, Perez (M.), Scripta Mater., vol. 52, 2005, p. 709– 712

Quantitative characterization and modelling of precipitation kinetics : towards understanding non isothermal precipitation and coupled phenomena, Deschamps (A.), Nicolas (M.), Perrard (F.) et Perez (M.), Int. Rev. Metall., vol. 101, 2004, p. 361-379.

Rheology of concentrated suspensions: a lattice model, in: Continuum scale simulation of engineering materials, Brechet (Y.), Perez (M.), Neda (Z.), Barbé (J. C.) et Salvo (L.), Wiley, 2004, p. 639–644

Microscopic modelling of simultaneous two-phase precipitation: application to carbide precipitation in low-carbon steels, Perez (M.) et Deschamps (A.), Mat. Sc. Eng A, vol. A360, 2003, p. 214–219

Hight- temperature contact-less viscosity measurement by the gas-film levitation technique: application to oxide and metallic glasses, Haumesser (P. H.), Brancillon (J.), Daniel (M.), Perez (M.) et Garandet (J. P.), Rev. Sc. Instr., vol. 73, no 9, 2002, p. 3275–3285

Computer simulation of the microstructure and rheology of semi-solid alloys under shear, Perez (M.), Barbe (J. C.), Neda (Z.), Brechet (Y.) et Salvo (L.), Acta Mater., vol. 48, no 14, 2000, p. 3773–3782

Microstructure and viscosity of semi-solid mixtures, Barbe (J. C.), Perez (M.) et Papoular (M.),  J. Phys. : Cond. Matter, vol. 12, 2000, p. 2567–2577

Contactless viscosity measurement by oscillation of gaz-levitated droplet, Perez (M.), Salvo (L.), Suery (M.), Brechet (Y.) et Papoular (M.), Phys. Rev. E, vol. 61, no 3, 2000, p. 2669–2675


Oscillation of liquid drops under gravity: influence of shape on resonance frequency, Perez (M.), Brechet (Y.), Papoular (M.), Salvo (L.) et Suery (M.), Euro. Phys. Lett., vol. 47, no 2, 1999, p. 189– 195


 Copyleft 2020 Michel Perez. No rights Reserved - Site réalisé avec Mozilla Composer - Seamonkey SeaMonkey